The TC7 Clam heat press Secabo is a modular open automatically toggle press. The user must during the transfers not wait beside the press, but may pursue other activities. After the set time the press opens automatically and announces this three seconds in advance by an acoustic signal to. Pushing a button allows the pressing operation at any time interrupt - for example, for pre-pressing of textiles. A digital controller Temperature and pressing time are conveniently selected, a counter counts the completed pressing processes with and can be reset to zero if necessary. The contact pressure is adjusted over a large hand wheel on the upper side of the heating plate. The TC7 transfer press, with a working area of ​​40cm x 50cm, has an additional cover the heating plate to protect the user from burns. The structure of the TC7 is fully modular, control unit, heating plate, base plate and base frame can be disassembled in a few slope reefs and exchanged. Thus, the use of other heating plates is, for example, possible. The TC7 folding press is suitable for professional use of all common heat transfer methods like flock films flexfoils, sublimation, inkjet-flex, etc.. The Secabo TC7 can be fitted with removable disks in different formats - are also equipped with a membrane base plate, a quick-change system as well as a slide-extension for use as a double disc press. ​technical data working area 40cm x 50cm max. clam angle 50 ° max temperature 225 °C maximum time preset 999 s max. working pressure 250 g/cm² power supply AC 230V / 50Hz - 60Hz, 2.0kW environment +5°C - +35°C / 30% - 70% humidity net weight 45 kg dimensions 41cm x 50cm x 80cm scope of delivery heat press, power cord, english manual